Installation-Guide


  1. Clean the intended mounting surface thoroughly with a damp cloth.

  2. Carefully peel the white film from the back of the adhesive to expose the sticky surface.

  3. Attach the adhesive bracket to the previously measured position. Let the adhesive cure for 48 hours before hanging your print to ensure a secure hold.

  4. Next, drill a hole for the wall hook. Please check which wall plug diameter you need beforehand and use the corresponding drill bit size. Then insert the wall plug and drive the screw through the slot of the wall hook. Please also make sure to use the correct wall plug for your wall type, as different plugs are required for drywall/plasterboard walls and brick or concrete walls.

  5. Avoid placing the self-adhesive hanger directly above radiators or other heat sources, as heat may soften the adhesive and cause the hanger to detach.